It is used for automatic flattening and laser welding of internal leads in junction boxes. The equipment automatically connects the upper and lower processes, the XYZ frame is combined with a visual servo system for precise positioning, and the welding quality is automatically detected. It is compatible with various components, supports rapid type change, and has a water-cooled design for efficient and stable operation.
| Applicable edition | L：1650-2520(mm)；W：990-1450(mm) |
| Cycle Time | 16s |
| Source | AC 3 phase, 380V/N/PE, 50Hz,17kVA |
| Gas source | 0.4-0.6(MPa)；Compressed Air：0.3m³/min |
| Noise | ≤75dB |
| Net Weight | 2200kg |
| Equipment Size(L×W×H) | 3200*1800*2205mm |
| Compatible incoming material specification | 1. The thickness of the busbar is <0.4mm, and there are no foreign matter such as residual glue on the surface of the busbar. The length of the busbar after bending through the junction box is about 16mm.
2. The junction box has no bottom tin and the welding area is flat. |
| Welding tension | ≥50N |
| Welding positioning accuracy | ±0.5mm |
| Laser lifetime | ≥20000hours（/Power attenuation of less than 20% over lifetime） |
